Specifications include, but are not limited to: The Idaho Department of Fish And Game, is seeking quotes from qualified vendors to provide Irrigation Wheel Lines. Fifteen (15) each – Extruded aluminum wheel line sections, four (4) inch diameter by forty (40) feet length, seventy-six (76) inch wheel with male and female connectors. Each wheel line must have a brass sprinkler installed with a 1.8 cubic meters per hour flow rate at four (4) bar operation pressure. Two (2) each – Extruded aluminum wheel line sections, five (5) inch diameter, twenty (20) foot length, seventy-six (76) inch wheel with male and female connectors. Each wheel line must have a brass sprinkler installed with a 1.8 cubic meters per hour flow rate at four (4) bar operation pressure. One (1) each minimum five (5) horsepower gas engine wheel line mover set, seventy-six (76) inch wheel, three (3) hose, or equal. Four (4) Inch Coupler – Fourteen (14) each die case aluminum clamp couplers, with gaskets. Four (4) inch End Plug – One (1) each end plug for the four (4) inch wheel line section. Five (5) inch Coupler – Two (2) each die cast aluminum couplers, fixed with epoxy and handle band. Five (5) inch End Plug – One (1) each end plug for five (5) inch wheel line section.
