Specifications include, but are not limited to: DIESEL ENGINE, FORKLIFT WITH A MINIMUM RATED LIFTING CAPACITY OF 9,000 LBS AT A 24” LOAD CENTER COMPLETE WITH EQUIPMENT AND ATTACHMENTS. 3.0.1 ENGINE: 4-CYCLE, TURBOCHARGED, DIESEL, LIQUID COOLED,MINIMUM 3.7 DISPLACEMENT, MINIMUM 74 HP AT 2,200RPM, 110 VOLT BLOCK HEATER AND THE COOLING SYSTEM PROTECTED WITH PERMANENT TYPE ANTI-FREEZE TO AT LEAST –34oF. AUTO SHUT DOWN FOR HIGH COOLANT TEMPERATURE, OR LOW ENGINE OIL PRESSURE. KEY ACTUATED START/STOP SOLENOID. EPA EMISSIONS COMPLIANT. LOCKING FUEL CAP. 3.0.2 TRANSMISSION: TWO SPEED FULLY REVERSIBLE POWER SHIFT WITH FORWARD AND REVERSE DIRECTIONAL CONTROL LEVER. 3.0.3 BRAKES/STEERING: TO BE EQUIPPED WITH PARKING BRAKE AND HYDRAULICALLY ASSISTED POWER BRAKES. POWER STEERING AND TILT STEERING COLUMN. 3.0.4 LOAD CAPACITY: MINIMUM 8,800 LB. CAB: VINYL SEMI-SUSPENSION SEAT WITH HIP RESTRAINT AND RETRACTABLE SEAT BELT, HORN, OPERATOR OVERHEAD ROLL OVER PROTECTION, PROTECTIVE COVER AND OVERHEAD RAIN GUARD. 3.0.6 MINIMUM INSTRUMENTATION: ENGINE HOUR METER, COOLANT TEMPERATURE INDICATOR, OIL PRESSURE AND CHARGING SYSTEM INDICATOR. 3.0.7 ELECTRICAL SYSTEM: TO BE 12 VOLT EQUIPPED WITH MINIMUM 670 CCA BATTERIES. BACK UP ALARM. ELECTRICAL MASTER SWITCH INCLUDED. LIGHTS: FORKLIFT TO BE EQUIPPED WITH LED LIGHT PACKAGE TO INCLUDE TWO FORWARD DRIVE LIGHTS FRONT AND ONE REAR, TWO BRAKE/TAILLIGHTS. INSTRUMENT PANEL ILLUMINATION. TOP MOUNTED AMBER STROBE LIGHT INSTALLED. MAST: 3 STAGE FULL FREE LIFT DESIGN, 185” MINIMUM TOP OF FORK HEIGHT, 87” MAXIMUM LOWERED MAST HEIGHT, MINIMUM 5 DEGREE FORWARD AND 6 DEGREE BACKWARD TILT. HYDRAULICS: THREE FUNCTION CONTROL VALVE WITH SEPARATE LEVERS FOR LIFT/LOWER, TILT, AND DETENTED 3RD FUNCTION LEVER. THREE FUNCTION INTERNAL REEVING HOSE GROUP. FORKS/CARRIAGE: SIDE SHIFT CARRIAGE 63” WIDE INTEGRAL PIN-TYPE WITH SIDE-THRUST BEARING, 48” LOAD BACKREST AND 48” PALLET PIN-TYPE FORKS WITH 2.0” x 6” HEEL SECTIONS. 3.0.12 TIRES: HEAVY DUTY 7.0 x 16-12PR DUAL DRIVER FRONT AND 7.0-12-12PR REAR STEER TIRES. 3.0.13 COLOR: MANUFACTURER’S STANDARD.
