Specifications include, but are not limited to: Wellness Track Specifications Excavate site 8” deep by 76’ long and 51’ wide. Compact existing subgrade and place 4” of asphalt material for playground padding and equipment. Pave 4” tall by 8’ wide walking track on top of asphalt base. Site shall be graded where only the walking track and inner loop will be exposed. Inner loop must be left 4” below walking track. Site shall be graded to slope water away from building and towards drainage structure. Installation of a 4’ drain line from existing playground area tied into existing manhole, up to 100’. Channel drain provided by awarded vendor. Crusher run must be placed in low spot next to existing asphalt area to alleviate ponding water. PlayGround Surfacing Specifications general SUMMARY: This Section includes furnishing and installing playground safety surfacing. Description of the system and general conditions: Surfacing shall be poured in place and troweled to provide for a resilient, seamless rubber surface installed over the specified base. The surfacing manufacturer shall be responsible for all labor, materials, tools, and equipment to perform all work and services for the installation of the surface. The surface shall be stable and slip resistant to comply with all requirements set forth in the Americans with Disabilities Act. Color EPDM materials (top cap/wearing surface). All EPDM cap materials will be peroxide cured rubber. Surfacing EPDM, Pour-in-Place with 1/2" cap that has been screened for any metallic material. The mixture rate of color granule to black granule for the EPDM cap will be 75% color granule to 25% black granule. SURROUNDING AREA OF FITNESS EQUIPMENT: Eight (8) foot wide concrete sidewalk which will surround the safety surface edging. Sidewalk shall be poured a minimal of 4” inches deep using a minimal strength rating of 3000 psi.