Specifications include, but are not limited to: General: The product offered shall be the manufacturer’s latest 95/96-gallon cart. The rollout containers must be compatible with standard American semi-automated bar-locking lifters (ANSI type B) as well as automated arm lifters (ANSI type G); Manufacturing Process: Each container body must be manufactured by the Rotational or Injection molding process(es) for body and lid.; Ansi Conformance: The cart shall meet all requirements of ANSI Z245.30-2008 and ANSI Z245.60-2008 for “Type B/G” containers. Independently certified copies of all ANSI test results shall be provided; the test results must state the load (in pounds) under which tests were conducted and the testing parameters. The ANSI Appendix D test for “Loading and Unloading Test for Carts” states that the required 520 dump cycles under the cart’s full rated load were performed on both a Semi-Automated Cart Lifter and a Fully Automated Grabber Arm.; Wheels: The cart shall be equipped with two (2) 10-inch plastic Snap-On wheels, rated for a minimum 200- pound load per wheel.; Wheel Axel: Carts shall be fitted with a minimum 5/8-inch diameter, solid steel axle coated with zinc chromate, which is mounted in the cart body through yokes that are molded into the cart body and provide permanently lubricated bearing surfaces.
