All correspondence must be made through the Vendor Portal. Specifications include, but are not limited to: Perform one time planting and landscaping 4 Crepe Myrtle trees per specification: Vendor shall install: 2.5 caliper base, 6 ft. spread, 11-12 ft height, single trunk, ball and burlap, root ball minimum 32” width, weight 700lbs minimum per tree. Hole must be dug 8” beyond width of root ball. Vendor shall have the burlap remain around root ball when planted and wire be folded down just below soil level and have the wire around the burlap remain. Vendor shall have the hole dug square with side walls of hole notched. Vendor shall provide each the required moisture control Miracle Gro mix in with native soil when installed around burlap. Vendor shall plant the root ball 2” above soil level. Vendor shall provide each tree with a formed tree ring around it to hold in any overflow of water. Vendor shall provide each tree with 4 tree micronutrient tree spikes around base of root ball after planting. Vendor shall slice the burlap in multiple areas to allow roots to grow through the burlap. Vendor provides everything needed for the job. Vendor must coordinate workdays with county office. M-F 8:00 am – 4:30 pm, no weekends, no holidays. Upon completion of work, vendor shall meet with Director or POC to review performance completion to specification. Vendor shall provide clean up after completion of work area is left clean.