Specifications include, but are not limited to: General Specifications: YES NO_ Base machine weight shall be no less than 34,000 lbs. Weight should include standard machine configuration, lubricants, coolants, full fuel tank. ____________________ Machine meets EPA Final Tier 4 and EU Stage IV standards ____________________ Machine shall be designed and built by the manufacturer. ____________________ Machine shall be equipped for ground level fueling for diesel and DEF as standard equipment ____________________ Transmission shall be designed and built by the manufacturer. ____________________ Machine wheel base (distance from front axle to mid-tandem) shall be no less than 240 inches. ____________________ ____________________ Engine: YES___________NO_ The engine shall have dual safety air cleaner elements, radial seal, dry type ____________________ Fuel system shall be high pressure, common rail ____________________ Engine shall be a turbo-charged, direct injection, four stroke 6-cylinder diesel engine designed and built by the manufacturer. ____________________ Engine displacement shall be no less than 6.55L (400 cu. in.) ____________________ Engine shall have a minimum of 190 net hp, and a minimum of 625 ft lbs. of torque ____________________ Machine shall be equipped with as standard; electronic overspeed protection to prevent the engine and transmission from over speeding. ____________________ Shall be equipped with engine stall prevention as standard equipment. ____________________ Engine should be equipped with “on the fly” exhaust filter cleaning to which doesn’t impede regular work. ____________________ Engine should be equipped with automatic “de-rating” to protect the engine and its components. ____________________ Engine shall be rubber isolation mounted to reduce noise and vibration
