Specifications include, but are not limited to: 1. GENERAL INFORMATION These trucks to be a new current year model and come equipped with all factory standard features including the following options: Conventional Cab, Set Forward Front Axle Configuration Truck 2. ENGINE Must be Inline 6-cylinder diesel 450 HP or greater with Compression Brake 1650 lbs.-ft torque or greater 12 Liter engine displacement or greater (no exceptions) 3. ELECTRONIC PARAMETERS Must be able to sustain a highway speed of 70 MPH, but no more than 75 MPH at governed RPM. 4. ENGINE EQUIPMENT Alternator, 12-volt, 240 amp. Minimum Fan Drive, automatic Engine block heater, 115 volts, with plug-in receptacle mounted under cab, LH door Automatic engine de-rate system with light and buzzer Battery box, with cover, frame mounted Three (3), 12-volt batteries, maintenance free, 1950 CCA minimum Jump Post located on the outside of the battery box Air compressor, 13 CFM minimum HD cooling capacity Battery disconnect switch 5. TRANSMISSION, AUTOMATIC Must be close ratio, 6-speed with overdrive, Severe Duty, On/Off Hwy Application, includes oil level sensor, with PTO provision, less retarder, maximum input 565 hp, maximum input torque 1650 lb.-ft., maximum turbine torque 2450 lb.-ft.