Specifications include, but are not limited to: Type – Ramp style trailer with beavertail; Size – 60,000 lb gross vehicle weight rating (GVWR), 49,000 lb capacity; Width – 102 in; Paint; Color – white; Frame must be cleaned prior to painting. Media blasting, shot blasting, or acid washing is acceptable; Two (2) coats of rust inhibited two component urethane primer; Three (3) coats of two component urethane top coat paint, with atmosphere controlled drying; Deck Height – Maximum of 37 in unloaded and 35 in loaded in travel position; Hitch – Adjustable pintle eye. Must be capable of attaching to trucks equipped with a 30 in high pintle hook and allow ramps to function properly; Jack Stand – Two (2), twin 2 speed jacks rated at 50,000 lb; Headboard and; Weight – Approximately 11,200 lb. FRAME Capacity – Designed to withstand 40,000 lb load concentration in 14 ft. CONSTRUCTION Type – 2 beam construction with outside channel frame rails; Beams – I-beam type of 50,000 pounds per square inch (PSI) yield, 65,000 PSI tensile strength steel on center beams, cambered, fabricated beams; Cross Members - Pierced Jr. I-beam cross members on 18 in centers; 50,000 PSI yield, 65,000 PSI tensile strength steel; Deck Perimeter – Constructed of 50,000 PSI yield, 65,000 PSI tensile strength steel, channel iron with flat side out; Decking – 2 in thick apitong or white oak hardwood decking with water proofing treatment applied, fastened with two (2) torx screws per crossmember; 3/16 in steel tread plate covers over the wheels; Deck Length – 25 ft of flat, usable space 5 ft dove; Load Angle – 15 degree maximum from horizontal; Approach Deck – 60 in long maximum, 24 in high and ; Pintle Draw Bar Eye – Adjustable pintle hitch 60,000 tensile strength.
