Specifications include, but are not limited to: UND is seeking to hire a contractor to install and procure a new overhead door in Upson. BUTT HINGES - BASIS OF DESIGN: STANLEY CB168 - HEAVY WEIGHT, 4 BALL BEARING HINGES: GRADE 1 - UNLESS OTHERWISE SPECIFIED, FURNISH THE FOLLOWING HINGE QUANTITIES FOR EACH DOOR LEAF. - 3 HINGES FOR DOORS UP TO 90" - 1 ADDITIONAL HINGE FOR EVERY 30" ON DOORS OVER 90" - 4 HINGES FOR DUTCH DOOR APPLICATIONS - FURNISH HINGES WITH SUFFICIENT WIDTH TO ACCOMMODATE TRIM AND ALLOW FOR 180-DEGREE SWING WHEREVER POSSIBLE LOCK AND LATCHES - BASIS OF DESIGN: CYLINDRICAL BEST 9k SERIES, 14 D-STYLE TRIM - UNLESS OTHERWISE SPECIFIED, ALL LOCKS AND LATCHES TO HAVE: 2-3/4" BRACKET; 1/2" MINIMUM THROW LATCHBOLT; BEST 7 PIN CYLINDERS; ANSI A115.2 STRIKES CLOSERS - BASIS OF DESIGN: LCN 4040 XP / 4040-4041 SERIES WITH BUILT IN STOP FUNCTION - CLOSURES SHALL BE SURFACE MOUNTED, REGULAR ARM MOUNTED PREFEERRED. - PROVIDE EXTRA HEAVY DUTY ARM (EDA / HD) WHEN CLOSER IS TO BE INSTALLED USING PARALLEL ARM MOUNTING. - CLOSERS MUST MEET OPENING RESISTANCE REQUIREMENTS OF ADAAG - CLOSERS SHALL BE FURNISHED COMPLETE WITH ALL MOUNTING BRACKETS AND COVER PLATES AS REQUIRED BY DOOR AND FRAME CONDITIONS AND BY ADJACENT HARDWARE - ATTACH CLOSERS TO WOODEN OR MINERAL CORE DOORS USING THROUGH BOLTS - MINIMUM 10-YEAR WARRANTY
