Specifications include, but are not limited to: 1) COAT – The coat outer shell and liner system shall be designed to provide maximum functionality, mobility, support natural movement, and reduce firefighter stress and fatigue. This design shall provide for no tugging, binding, or bunching of material as moving arms forward, unrestricted elbow movement, reduce conflicts while wearing SCBA, and have a modified Raglan or Raglan design in the shoulder seams of shell and liner to promote unrestrictive movement and reduce turnout coat hem rise. Outer Shell – 6.5 oz Armor AP Nomex/Kevlar and Kevlar Filament/Khaki Color. Zipper/Woven Hook and Loop/Fabric Zipper Pull. Right- and Left-hand Kevlar Lined Cargo/Hand Warmer Pockets on Outer Shell 8”x8”x2” Velcro enclosure. Hand Warmer Pockets are to be lined with NOMEX Fleece. Tabless Collar Design Radio Pocket 4”wide x 2.5”deep x 7”height on Left Chest. Radio pocket flap shall be notched on both sides (T-Flap) to accommodate the radio antenna. Mic Strap on Left Chest over Radio Pocket 1”x3” Drag Rescue Device (DRD) designed for easy access, removal, inspection, and reinstallation. Survivor Flashlight Holder with Hook on Right Chest. 8” Thumb thru wristlets Self-Material reinforced elbows and shoulders. Scotchlite Triple Trim in Orange 3” wide. Trim Configuration – New York Combo. Name Plate approximately 18” long x 6” wide with 3” letters, Orange in color, Velcro to the lower bottom of the coat just above the 3” Scotchlite Trim (if the last name is too long, smaller letters are appropriate to use). Will also consider hanging name plates. Black, Polymer Coated Aramid Reinforced Cuffs. 2) COAT LINER Thermal Liner - 7.1 oz CoreCXP 2-layer. Moisture Barrier - 5.5 oz Stedair 4000. Inside sewn pocket/Left side on liner 8”x8”. Removable liner with snaps and/or zipper. 3) PANT – The pant outer shell and liner system shall be designed to provide maximum functionality, mobility, support natural movement, and reduce firefighter stress and fatigue. Shall be constructed and ergonomically designed with a noticeable natural bend at the knee that provides an unrestrictive range of motion when the knee is bent and allow legs to move freely while bending, climbing, kneeling, and crawling. The design shall have a crotch panel to reduce tension and increase comfort for the firefighter. Outer Shell - 6.5 oz Armor AP Nomex/Kevlar and Kevlar Filament/Khaki Color. Adjustable Kevlar Belt Closure. Zipper/Woven Hook and Loop. Angled cuff to reduce wear On each leg, 10”x10”x 2” Full Bellow Pant Pockets Reinforced/Kevlar with Velcro enclosure. Knee Reinforcement: 1-Layer (Foam encapsulated in moisture barrier), Black, Polymer Coated Aramid. Reflective Scotchlite Triple Trim in Orange 3” wide around cuffs. Removable/Adjustable/Padded Suspenders/X-Back with Parachute Pull. Black, Polymer Coated Aramid Reinforced Cuffs
