Specifications include, but are not limited to: 2.1.1 Polyethylene Pipe Liner. 602 2.1.1.1 Solid Wall Polyethylene Pipe with Integral Joint. • AASHTO M 326-08, Polyethylene (PE) Liner Pipe, 12- to 63-in Diameter, Based on Controlled Outside Diameter, Standard Dimension Ratio (SDR) Classification - 32.5 • ASTM F 714, Standard Specification for Polyethylene (PE) Plastic Pipe (SDR- PR) Based on Outside Diameter 2.1.1.2 Profile Wall Polyethylene Pipe with Integral Joint. • ASTM F 894, Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain pipe, 66- to 120-in diameter (inside), Ring Stiffness Constant (RSC) - 160 m1mmum 2.1.1.3 Profile Wall Steel-Reinforced Polyethylene Pipe • AASHTO M335, Steel-Reinforced Polyethylene (PE) Ribbed Pipe, 30-in to 60- in diameter (inside), Classification TypeS • ASTM F 2562, Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for NonPressure Drainage and Sewerage, 66- to 120-in diameter (inside), Class 2 2.1.2 Polyvinyl Chloride Liner. **Handling and installation restrictions mayapply during low temperatures. ** 2.1.2.1 Solid Wall Polyvinyl Chloride Pipe with Integral Joint • AASHTO M 278, Class PS46 Poly(vinyl Chloride)(PVC) Pipe, 4- to 15-in diameter, Classification Type S or M • ASTM F 679, Poly(vinyl Chloride)(PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings, 18- to 48-in diameter 2.1.2.2 Profile Wall Polyvinyl Chloride Pipe with Integral Joint • AASHTO M 304, Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter, 4- to 48-in diameter, Bell Joint 2.1.3 Polypropylene Liner. **Handling and installation restrictions may apply during low temperatures. ** ..... 2.1.3.1 Profile Wall Polypropylene Pipe. • AASHTO M330, Polypropylene Pipe, 12- to 60-in diameter, Classification Type C, S, or D
