Specifications include, but are not limited to: Size: The Trailer box must be of an industry standard size of 6 feet wide by 12 feet long, with a V style nose. The minimum interior height of the trailer shall be 72 inches. Axle/GVW: The trailer shall be equipped with a single 3,500lb spring ride axle equipped with electronic drum brakes and easy lube hubs. The Empty Vehicle Weight (EVW) shall not exceed 1,200lbs meaning that the trailer shall have a minimum payload capacity of 2,300lbs. Brake system shall include a trailer breakaway switch with Hitch/Electrical Plug: Trailers shall be equipped with a adjustable height 2 ½” lunette ring and must come equipped with a 7-pin flat RV style electrical connector. Entry Doors: Trailers shall be equipped with one 32" x 66" Side Door with paddle handle and piano style hinge. The rear of the trailer shall have double barn doors with a bar lock style closure. Trailer Construction: The product offered shall meet or exceed the following with 3,500 GVW construction in mind: • 24" On-Center C-Channel Floor Crossmembers • 24" On-Center Tube Wall Studs • 24" On-Center Tube Roof Bows • Safety Chains 15" Deep Wedge • Plastic Door Holders • Aluminum Fenders • WideTrac Full width interior walls without fender boxes • Silver Wheels • Fully Painted Frame • Polyethylene Vapor Barrier • .030 Smooth Aluminum Exterior Semi-Screw-less (Seams Screwed w/ Color Matching Screws) • Seamless Aluminum Roof • Aluminum Bottom Trim • 16" ATP Stoneguard w/ Top Trim • Flow-Through Scoop Vents • 5.2 mm Lauan Wall Liner w/ Vinyl H-Molding • 3/4" Engineered Wood Floor • 12 Volt Wall mounted LED Dome Light w/ 1 Wall Switch • LED Slimline Lights and 3/4" Bullet Marker Lights (All Clear Lens)
