Specifications include, but are not limited to: • Clean and Prep walls and trim for painting. Tape as necessary. Drop clothes as needed. • Caulk on seams, perform any surface repairs using 950A Crylic Caulk; sand down as required. • Patch and repair walls, as needed, sand down as required. • Prime walls and trims, if needed. • Paint all walls using Sherwin-Williams ProMar 200 Egg Shell. Additional coats as needed to ensure previous wall colors do not come through. **Paint color to be decided in advance by State and communicated to vendor prior to painting.** • Paint all trims using Sherwin-Williams SuperPaint Interior Latex Semi-Gloss. Additional coats as needed to ensure previous wall colors do not come through. **Paint color to be decided in advance by State and communicated to vendor prior to painting.** • Clean and legally remove materials. The jobsite will be kept orderly and safe and a final complete clean-up will be done at the completion of the job. • Provide standard manufacturer’s warranty. • Provide building permit, if required. • Maintain required levels of workers compensation and general liability insurance. • Additional Work (cost plus) UNDER NO CIRCUMSTANCES SHALL ANY ADDITIONAL WORK TAKE PLACE WITHOUT THE OWNER’S AUTHORIZATION
