All correspondence must be made through the Vendor Portal. Specifications include, but are not limited to: Rubber tracked compact loader. 17.7” wide tracks minimum with standard tread pattern. Permanently sealed and lubricated all steel undercarriage with suspension system. Turbo diesel engine of sufficient horsepower to properly operate machine. Two-speed hydrostatically driven power train with electronic backup alarm. Heavy duty cooling system with adequate protection to prevent damage from debris. Cooling fan with reversing functionality. Heavy duty rear engine compartment door with vandal lock to protect engine but still allow for engine serviceability. Vandal locks on all other grates and covers. Vertical lift loader system with self-leveling bucket and operator controlled ride control. Cold weather starting aides and 120-volt electric engine block heater. Standard hydraulic pump flow minimum 23 GPM minimum; with auxiliary high flow minimum 36 GPM minimum. Standard and auxiliary couplers mounted on loader boom towards attachment area. Coupler types to be manufacturers standard SAE design to work on all standard attachments including coupler for attachments requiring tank drains. Electronic attachment control kit with interface pin connector mounted and protected on the loader boom arm at the same location as the standard and auxiliary couplers. Operating weight 12,500 lbs. minimum. Key on and off ignition with safety shut down system with operator horn. Manufacturers deluxe instrumentation package (minimum monitoring coolant temp, engine oil pressure, voltage and engine hour meter). Rated operating capacity with the maximum counterweight configuration to be 3,900 lbs. minimum. Fully enclosed, pressurized operators cab with slide type side opening windows. Heat and air conditioning in cab with manufacturers sound suppression system. Cab door to have windshield wiper. Selectable joystick controls for the two lever pilot controls for steering, speed, forward and reverse and all loader functions with integral attachment control switches. Side, front and rear work lights with standard warning lights. Parking brake. Severe duty 80” wide tooth bucket with bottom teeth. Bucket to lift pin height to be 126” minimum. Remote control capability with integral manual locking levers to manually aid locking & unlocking of attachments. AM/FM radio. Heated air ride suspension seat with seat belt. Night vision/color rear vision camera system mounted. Camera to be protected.