Specifications include, but are not limited to: • Provide new photovoltaic system: design, sizing and associated structural engineering requirements as required to install and interconnect with the preexisting building structure, electrical service, and space provisions for such. • Provide manufacturers make and model information for all proposed equipment. Preferred consideration may be given to domestically (USA) manufactured equipment. • Provide and install solar panels with a minimum 25-year warranty. • Provide and install corresponding inverter(s) with rapid shut down feature. • Provide and install panel racking system and details of roof attachment method. Panel racks and roof mounting shall not be installed in a manner which will void the roofing warranty, life expectancy and/or performance or interfere with the existing roof solar tubes. • Provide and install all AC/DC electrical production and monitoring interconnections including conduits, wiring, connectors, boxes, switches/breakers, grounding, and required labeling. • Permanently repair/patch all exterior/interior penetrations of the building’s enclosures (brick/mortar/standing seam roofing/sheetrock, insulation, etc.) with an approved sealant for such material associated with the mounting, installation, cable routing and interconnection of the photovoltaic system. • To the maximum extent possible, proposals shall utilize the space constraints of the existing roof and electrical equipment spaces in order to minimize the impact to the operations within the building. • Contractor will apply for and readily furnish all local, state and federal permits as required. • Contractor shall adhere to all requirements of the most current edition of the National Electrical Code.
