Specifications include, but are not limited to: replacement sound system in the gymnasium and an optional proposal for a new sound system in the cafeteria. Both systems must be designed for and implemented with considerations to daily use by the physical education department, choral/vocal concerts, music concerts, meetings, assemblies, etc. - Proposer must make a site visit to determine best equipment selection based on the space, specifications, and system requirements to meet the needs of Woerther Elementary School. Please contact Josh Walz at walzjoshua@rsdmo.org to schedule. - Proposals shall include installation, programming, testing, and training. - Pricing shall be submitted separately for each option. - New systems must provide complete audible coverage throughout the gymnasium and cafeteria spaces. - Lifts or other equipment necessary to install the equipment must be provided by the proposer. Proposer is responsible for protecting the gym floor. - The gymnasium system should the following equipment: o New wall plate on gym wall for mic inputs o Large capacity mixer o Analog or digital o Wire o Antenna distribution and remote-mount antennas for better wireless mic signal reception o Wireless mics if needed - The cafeteria system should include the following: o Install new system as there is no existing system o Requires a lockable wall mount cabinet to contain equipment. Best location to mount the cabinet will be determined by a discussion between the bidder and the building administration. o System must be adequate to provide full quality sound coverage throughout the entire cafeteria. o System should contain an analog audio mixer o System should contain passive speakers’ w/ amplifier(s) o System should contain (2) wireless receivers w/ a handheld and lavaliere (body) transmitter for each receiver o System should have Bluetooth capability for playing music o System should integrate audio from the existing television/monitor in the cafeteria o System should allow for at least (2) additional XLR microphone inputs. Location of XLR jacks will be determined by a discussion between the bidder and the building administration.
