Specifications include, but are not limited to: Class 2 - STANDARD STYLE Safety Vest Specification All materials and physical properties used in the construction of the vest shall meet the requirements of ANSI/ISEA 107-2015 Type R, Performance Class 2 Standard Style safety vest. COLOR: Fluorescent Orange BINDING: Color may vary, black or orange is preferred. SIZING: Single sizing only (no multi-sizing) FABRIC: Mesh fabric FRONT CLOSURE: Front closure shall be a zipper LOGO: NHDOT Logo across the back between the shoulders POCKETS AND MICROPHONE TABS: Not required but accepted REFLECTIVE BANDS: Retroreflective fluorescent yellow band, a minimum 3.5” to 4” wide, with a 2” wide retroreflective material centered and affixed to the band. COMPLIANCE, CERTIFICATION, AND LABELING: Compliance testing reports for background materials, combined-performance materials, and retroreflective materials shall be submitted for approval with bid documents. A completed ANSI/ISEA 107-2015 Type R Apparel and Headwear Compliance Certificate shall be included with each shipment. Each vest shall include either a tag or label stamped inside the back neck area in black ink stating care of the garment and ANSI compliance of the vest. Class 2 – BREAK-AWAY STYLE Safety Vest Specification All materials and physical properties used in the construction of the vest shall meet the requirements of ANSI/ISEA 107-2015 Type R, Performance Class 2 Break Away Safety Vest. COLOR: Fluorescent Orange BINDING COLOR: Color may vary, black or orange is preferred SIZING: Single sizing only (no multi-sizing) FABRIC: Mesh fabric POCKETS AND MIC TABS: Not required but accepted FRONT CLOSURE: Front closure shall be a zipper LOGO: NHDOT Logo across the back between the shoulders REFLECTIVE BANDS: Retroreflective fluorescent yellow band, a minimum 3.5” to 4” wide, with a 2” wide retroreflective material centered and affixed to the band. FOUR BREAK AWAY POINTS: o Two shoulder seam break away points shall be across the chest as seen in photo below o Two break-away points with expandable side tabs with hook & loop fastener/Velcro to the front bodice. COMPLIANCE, CERTIFICATION, AND LABELING: Compliance testing reports for background materials, combined-performance materials, and retroreflective materials shall be submitted for approval with bid documents. A completed ANSI/ISEA 107-2015 Type R Apparel and Headwear Compliance Certificate shall be included with each shipment. Each vest shall include either a tag or label stamped inside the back neck area in black ink stating care of the garment and ANSI compliance of the vest.
