Specifications include, but are not limited to: New current standard over-center model with material handling Mounted over rear axle Paint inside and out of all boom parts with powder coat paint process and color to match chassis 55’ to bottom of bucket (60’ working height) Single two (2)-man bucket Fiberglass line body Install on LES supplied chassis by manufacturer or LES approved distributor and comply with all current applicable OSHA, ANSI and DOT Standards. Aerial device to be certified at 46KV (Category C). Aerial device shall be in compliance with ANSI 92.2 in the 4.5.1 “stability on level surfaces” and 4.5.2 “stability on slopes”. Cannot raise a tire or tires at rated loads in these positions and not to rely upon removable tool and material weight added by customer to meet stability.
