All correspondence must be made through the Vendor Portal. Specifications include, but are not limited to: 60” CA SERVICE BODY QUANTITY: One (1) ; . New current standard model. Fiberglass line body . Installed on LES supplied chassis by manufacturer or LES approved distributor and comply with all current applicable OSHA, ANSI and DOT standards . Fiberglass constructed line body for installation on a 60” CA chassis with dual rear wheels . All doors weather sealed, water tight and keyed alike . Rotary styled paddle latches on all compartment doors . 3/16” steel tread plate load area floor and tail gate . All compartments equipped with fiber-glow “rope type” lights at top and both sides of each compartment with lighted rocker style master switch installed on the “run” side of the chassis ignition switch . Minimum 6 inch clearance between rear tires and body/fender skirt for tire chain clearance
