Specifications include, but are not limited to: a. Provide a dry, safe location for storage of the elevator materials. b. Permit placement of equipment for drilling jack holes and removal of spoils from drilling operation. c. Provide loose, dry, sand fill around the elevator jack casings. d. Provide two (2) hour fire rated hoistway walls, machine room walls and ceilings, with required legal ventilation. e. Provide barricades and protection of hoistways during the time the elevator equipment is being installed. f. Cut walls, floors, and partitions, together with any repairs made necessary thereby. Provide recesses in walls and floors to receive doors, sills, and signal equipment such as indicators, push buttons, hall lanterns, etc. g. Set of inserts as shown on the approved elevator Shop Drawings. h. Protect all finished installed work until Substantial Completion of Project, including installation of protective coverings at hoistway entrances. i. Provide legal machine rooms with ventilation, disconnect switches, light switches, 110 Volt breakers for car lights and fire rated doors and frames (B-Labeled). j. Grout the underside of thresholds at all elevator landing entrances.