Specifications include, but are not limited to: Tree trimming and removal for electrical distribution system; Lump sum proposal for all tree trimming and removals in Utility Area 1. Approximately 37,238 linear feet of electrical circuit with 65 trees to be removed. ; Lump sum proposal for all tree trimming and removals in Utility Area 2 Approximately 46,000 linear feet of electrical circuit with 14 trees to be removed. 1. Remove, clear, cleanup, and stump as necessary for a 5’ long group of scrub, sucker, seedling, and sapling type trees. 2. Remove, clear, cleanup, and stump removal for tree <6” diameter. 3. Remove, clear, cleanup, and stump removal for tree 6” – 12” diameter. 4. Remove, clear, cleanup, and stump removal for tree 13” – 24” diameter. 5. Remove, clear, cleanup, and stump removal for tree 25” – 36” diameter. 6. Remove, clear, cleanup, and stump removal for tree 37” – 48” diameter. 7. Remove, clear, cleanup, and stump removal for tree 49” – 60” diameter. 8. Remove, clear, cleanup, and stump removal for tree >60” diameter. The work to be performed under the provisions of these Contract documents consists of furnishing labor, tools, equipment, and materials to trim or remove trees and remove stumps within Hastings Utilities service area. a. The Contractor shall have sufficient personnel and equipment to complete the specified jobs in the time frame agreed upon. b. Contractor shall have personnel, that are performing cutting activities next to energized power lines, “Line Clearance Trained” or the ability to have personnel trained within 45 days of commencing work. c. The tree trimming may involve work around high voltage wires (4,160 volts to 115,000 volts). The Contractor shall use extreme caution such that personal safety is not jeopardized, and electric continuity is maintained and the lines are protected from damage.