Specifications include, but are not limited to: 1.3.1.1. All fiber optic cabling must be 50-micron laser-optimized multi-mode (OM3) with SC terminations. 1.3.1.2. Each fiber optic run must consist of 12 strands and protected either by flexible conduit innerduct or armored, plenum cable. The vendor is responsible for all termination hardware and installation. Fiber test results must be provided upon completion of the installation. 1.3.1.3. Awarded Vendor will be responsible for providing either a rack-mounted or wall-mounted Fiber SC Patch Panels at each MDF or IDF as required. 1.3.1.4. Awarded Vendor will be responsible for providing for two 5-meter SC to LC patch panels to connect switches on both sides 1.3.1.5. Awarded Vendor will be responsible for removing the legacy fiber optic cable per applicable Electrical Code(s). 1.3.1.6. All cabling runs should be labeled appropriately. 1.3.2. Installation Notes 1.3.2.1. Floor plans with MDF and IDF locations will be provided at the pre-bid meeting. 1.3.2.1.1. Qty 1 - IDF Elementary School 1.3.2.1.2. Qty 2 - IDF Junior High School 1.3.2.1.3. Qty 2 - IDF High School 1.3.2.2. All cable paths are above the drop ceiling