Specifications include, but are not limited to: Two Alweld 2060V Tuns with the following dimensions 1. Minimum overall centerline length: 21’ 2. Minimum bottom width: 60” 3. Minimum beam (Top Width) 89” 4. Minimum side depth: 28” 5. Minimum rib spacing 9.5” 6. Minimum 3’ tunnel hull 7. Welded Semi-V Tunnel hull 8. Hull thickness: minimum .100 bottom 9. 21” Transom height 10. Electronic power transom with minimum 6.5” travel Additional specifications 1. Motor: Yamaha 115 hp (model F115). Prop drive, (4 stroke required) with mechanical steering 2. Cables extended to accommodate power lift prop/jet unit 3. Additional appropriately sized jet drive unit for outboard 4. 3/16” reinforced transom plate 5. Splash well 6. Dual knee braces 7. Bow eye reinforcement 8. Walk through Center console with ‘welded version windshield with glass’. 9. 2-Bow canvas top with side and back curtains 10. Driver and rear passenger back rest type seats, mounted on boxes to include storage access doors’ 11. Hull Color: green 12. Appropriately sized galvanized trailer with spare tire and side guides Required installed accessories Standard Walk thru Console, operator and passenger seats, rigged for optional external fuel tanks (15-gallon poly type), Bilge pump (750 GPH), water fuel separator filter, and hour meter, Dual Batteries with on/off/both switch, tachometer, floorboards’, 12v power plug for charging phones etc., glovebox, drink holders, driver and passenger wipers.
