Specifications include, but are not limited to: 71 gross horsepower minimum with 120-volt engine coolant block heater Minimum operating weight 12,800 pounds Enclosed cab to be certified ROPS and FOPS to include air conditioning and heat with window defrosting, AM/FM/weather band radio, tilting and telescopic steering column, deluxe full suspension operator’s seat with arm rests and seat belt, all loader function controls to be located in one “joystick” controller, two (2) external rear view mirrors on either side of the cab and an internal manually adjusted interior rearview mirror in the cab Loader functions to provide a parallel lift to keep loads level automatically through the range of motion of the loader Operator controlled locking and unlocking from cab skid steer style coupler. Two (2) hydraulic circuits to run attachments at the coupler, one (1) standard flow and one (1) high flow with case drain circuit for various attachments 1.3 yard capacity general purpose bucket minimum with bolt on cutting edge Loader to have “ride control” function for smooth transport of materials and retention of material in bucket Steering angle of 39 degrees to each side minimum Ability to “creep” or “inch” machine for constant speed operations with high flow hydraulic circuit at the loader coupler for attachments and for high flow loader functions at high engine idle operation to approach areas for dumping functions (in trucks, dumpsters, excavations) Heavy duty axles with driver actuated differential locks in each axle or limited slip differentials in each axle Reverse alarm LED type work lights (front and rear) and warning flashers and top of cab mounted amber strobe light Heavy duty deep lug all terrain tires