Specifications include, but are not limited to: The Department of Transportation and Public Facilities, Statewide Contracting and Procurement, is soliciting bids for State and Federally Funded Traffic Marking Paint and Reflective beads to be delivered to various locations throughout Alaska. All paint provided under this specification must meet the requirements of Federal Specification AA-2886B, Type II, and be formulated with a minimum of 70% Acrylic Copolymer resins. A. Pigment Composition: Pigments shall be first quality paint grade pigments. The inert or filler pigments must be of a type and quality generally recognized as first quality paint grade products, and shall not contribute to settling of the paint in storage or be so hard as to cause excessive wear of the spray application equipment. B. Vehicle or Resinous Binder Composition: The vehicle may be any combination of natural or synthetic resinous materials that are not prohibited per this specification. All resins used must be permanently capable of re-dissolving in the solvent combination used in the paint. Paint and binder combinations shall minimize build-up of the paint on the sides of tanks, paint lines, and clogging of spray equipment from un-dissolvable skins.
