All correspondence must be made through the Vendor Portal. Specifications include, but are not limited to: The Kanawha County Schools Purchasing Department is soliciting bids to establish an open-end contract for doors, frames and door hardware. 3.1.1 All doors will be numbered to correspond with the room where they are to be installed. All doors are to be labeled with these numbers and are to appropriately labeled in accordance with the State Fire Marshal Code, rules and regulations. 3.1.2 Steel craft masonry frames have been installed at our facilities and therefore, require Steel Craft Doors. All steel door and frame hardware locations to match “Steelcraft” locations. 3.1.3 Doors and frames must comply with ANSI/SDI 100 RR-D575B(1) Recommended Specifications for Standard Steel Doors and Frames specified. 3.1.4 Hardware installation shall be installed at the site location. Factory or shop installation of hardware is not permitted. 3.1.5 Fire-Rated Door Assemblies: Units must comply with NFPA 80 (see Exhibit A) are identical to door and frame assemblies tested for fire-test response characteristics per ASTM E 152 Reference 80 Published on January 1, 2022 and are labeled and listed by UL, Warnock Hersey, or another testing and inspecting agency acceptable to authorities having jurisdiction. 3.1.6 Deliver doors and frames in cardboard-wrapped or crated containers to provide protection during transit and job storage. 3.1.7 All doors, frames and door hardware shall be prefinished Birch Autumn Oak # S64N12. 3.1.8 Steel Frames materials: 3.1.8.1 Hot rolled steel sheets and strips: Commercial-quality carbon steel, pickled and oiled, complying with ASTM A 569. 3.1.8.2 Cold-rolled steel sheets: Carbon steel complying with ASTM A 366, commercial quality, or ASTM A 620.
