Specifications include, but are not limited to: The Vendor shall provide an annual fall maintenance inspection. The maintenance inspection shall include the following services: • Brush or vacuum grilles, coils, fan, etc. • Lubricate fan and motor bearings where applicable • Check belts and sheaves where applicable • Check/clean drains, pans, condenser pumps • Check/clean strainers where applicable • Check steam traps, valves, etc. where applicable • Check and tighten all electrical connections • Check all control operations • Lubricate and adjust dampers and linkages • Check unit–operating conditions • Check heat exchanger for leaks where applicable • Check gas valve and controls where applicable • Check oil burner and controls where applicable N 8 • Check and tighten electric heater connections • Check amps/volts where applicable
