Specifications include, but are not limited to: Base: Two interlocking base panels. 1-5/8" thick 45 lb density particle board, sandwiched between 1/8" thick hardboard and faced both sides with .050" thick, highpressure laminate and banded on three exposed edges with heavy duty T-molding that is glued and steel pinned every twelve inches. Top: Premium M3 Grade, 45 lb. density particle board table top core is sandwiched between 1/8" thick hard-board and faced with special 0.05" thick high pressure laminate for superior quality and long term durability. Molded edge is radiused forsafety and comfort, pres-sure fused to the top, rendering it firmly attached and highly sanitary. Embedded T-nuts secure top to base with tight steel to steel connection for maximum long term reliability. Robust 1.5" thick edge profile. $0.00 5 $0.00 C1 Norix Integra Stack ChairArmless one-piece injection molded plastic stack chair. No exposed fasteners. Withstands static load test of over 400 lbs. Five year warranty. High impact grade copolymer polypropylene with FRPP5 Fire Retardant. Chemically resistant. Chair must be armless due to size constraints and for coordination with table heights. Color: Graphite. $0.00 26 $0.00
