Specifications include, but are not limited to: MPA 379 Open Enrollment to provide repair, installation and other related services to automatic door operators. The Contractor shall provide all labor, materials, equipment, supervision, transportation and management required to perform “door” and “overhead door” repair, installation and other related services in various State owned and or operated facilities. Best commercial practices shall be applied in performance of work. All work shall be completed per approved and accepted industry and equipment manufacturer’s standards and shall comply with building and safety codes, applicable local, State, and Federal regulation. A. New installation will result in a fully operational ADA compliant automatic door operator and related components installed on existing door(s). All equipment will be warranted for (1) one full year from date of acceptance. B. Semi-Annual maintenance will consist of (2) two scheduled visits per year (at approximately 6 month intervals) to lubricate, adjust, clean and inspect operation of all automatic swinging or sliding door or pair of doors. Inspections will be performed in accordance e with American Association of Automatic Door Manufacturer’s Guideline and in compliance with ANSI A156.10. C. Battery operated devices will have their batteries changed at each scheduled visit. D. Vendor will respond to normal service calls no later than the first business day following the day of the call. Response to emergency service calls, those calls where there is a safety or security risk will be within (3) three hours.
