All correspondence must be made through the Vendor Portal. Specifications include, but are not limited to: (2) Bob Tail Style Insulated Live Haul Tanks 52" wide x 84" long x 36" high with tie downs (~96” long w/ ports) Double Wall Insulated Aluminum - All Welded Construction 2” Thick Polyurethane Foam Insulation 0.125” 5052 Aluminum Inner Tank 0.080” 5052 Aluminum Outer Skin Dual Inner Tank Compartments @ ~225 gallons each 4” Sloped Compartment Floor toward ejection port (2) 4” Sloped Outside Corners toward ejection port (4) One Recessed Ejection Port per compartment (2) Reinforced Raised Floor around ejection port transition required 6” Camlock Ejection Ports w/ leak free cap (2) One T-Handle (not recessed) per compartment (2) One Aluminum Slide Gate per compartment to fit ejection recess (2) One Fresh-flow Aerator Bracket per compartment (2) One 5” Screened Air Intake per compartment (2) One 1” diameter Screened Overflow Hole per compartment, 32” up from outer tank bottom (2) One ¾” diameter Hole For Oxygen Tubing at rear of each compartment (2) Large Latching Piano Hinged Lids w/ Handles for full compartment access (2) Must provide leak tight seal Must provide for scissor style lid support which will safely hold lid in fully open position Lid Clamps 5” long with stainless steel wing nut (4) Lifting Lugs Each Corner (4) (3/16” thick x 2” wide minimum) Integral Mounting Brackets Each Corner (4) to mount tanks on truck body Extra Mounting Brackets (unmounted) for net holders (4)
