Specifications include, but are not limited to: The unit described under these specifications shall be the manufacturer's latest model and meet the following minimum specifications. Any deviations from the specifications shall be clearly identified by the vendor on a separate sheet attached to the bid proposal. Trailer 48 Foot, 2-Axle, 18 Slat Walking V-Floor Trailer with Compactor Removable Roof for Garbage Application; Model 48-2-TW-WF meets or exceeds all Federal, OSHA, and DOT standards. Unit is most current design production model and includes all new production changes. Dimensions Length – 48 feet; Width – 102 inches; Height – 13 feet 6 inches maximum to top of roof; Capacity 127 cubic yards minimum; Weight 20,780 pounds +/- 3%; Walls and Front Bulkhead Heavy duty 6061 T-6 aluminum. Double walled extrusions with internal ribs running the full length of horizontal extrusions. Two inch rib spacing on center. Wall skin thickness of 0.140 inches (EHD is 0.190 inner). Panel connections- tongue and groove. Top, bottom and interlock with front corner and rear post. Front corners- 8 inch diagonal radius. All welded construction. Wall height sized so that overall height from ground to top of roof does not exceed 13 feet 6 inches. Sides to have compactor side wear plates. Front access door with curb hinges with flip step over electric and air. Side wall to be prepped for future spring bar but no bar provided.
