Specifications include, but are not limited to: 1. Model/Year: 2022 model or newer. CAT 315, Komatsu PC138USLC-11, John Deere 135 G or approved equal; latest production. Please see Pre-approval requirement on page 5. 2. Weight: Operating weight shall be 33,000 lbs. minimum. 3. Tail Swing Radius: Maximum radius 62” for working in restricted lane space. 4. Buckets and Thumb: Operating bucket shall be 42 in. width, with rated capacity of .99 cu. Yd. with thumb; spare bucket shall be 30 in. width with rated capacity of 0.64 cu. Yd. with thumb minimum. Buckets shall be furnished with cutting edge and replaceable teeth (detachable). 5. Push Blade: Equipment shall be equipped with 8’6” wide mounted on main “X” frame. 6. Engine: a. Net power of 97 hp minimum at the flywheel when engine equipped with fan, air cleaner, muffler and alternator. b. Shall be 4-cylinder, 4-cycle diesel powered, water-cooled, direct injection, turbocharged and air cooled, minimum. c. Compliant to current EPA Tier 4 standards. d. Provide Electronic Control Module system with sensors, to monitor and adjust the engine rpm, fuel consumption, air, coolant, and exhaust systems. Electronic Control Display shall be located in operator’s cab. e. Air filter, dry type cleaner with replaceable filter, minimum. f. Radiator, heavy duty, reduce-dust type g. Engine operating system shall be equipped with alarms for high temperature; low lube oil pressure; hydraulic pump pressure. Operating system with alarm shall be located in operator’s cab. h. Daily service for oil dipstick, fuel, hydraulic oil, oil filter, air filter, fuel filter, fuel/water separator and greasing points shall be accessible from ground level.