Specifications include, but are not limited to: One (1) new Pine Instruments AFG2 Gyratory Compactor, must be delivery completely assembled with the following specifications: Included Accessories • AFG1A14T 150mm Specimen Lift Handle • AFG1M15 150mm Mold Assembly (AASHTO T312) • CLGSMOS2T Ram Foot Lubricant • CLGMOS2 Bearing Grease Features • Power Requirements: AFG2A: 115 VAC(±10%), 12 Amp, 50/60 Hz • Dimensions: 875 mm wide x 900 mm deep x 1375 mm high (~34.5 inch x ~35.5 inch x ~54 inch) • Weight: Approximately 400 kg (880 lb) • Applied Pressure: 200 kPa – 1,000 kPa ±60 kPa gyration 0-5; ±10 kPa gyrations >6 Note: Users set the desired pressure via the control panel. • Angle of Gyration: 0.00° – 1.50° (0.00 – 26.18 mrad) • Selectable to internal or external angle • Speed of Gyration: 30 gyrations per minute • System: Electromechanical • Number of Gyrations: 0 – 999 gyrations • Minimum Specimen Height: 0.0 mm • External Mold Dimensions: 215.9 mm OD x 279.4 mm tall • Internal Mold Dimensions (Space Available for Loose Asphalt): 150.0 mm +0.0/-0.1 mm ID x 252 mm tall • Mold Weight (empty): • 13.1 kg (29.0 lbs.) • Modes of Operation: Compact to number of gyrations, specified height, or locking point. Compact at a specified internal or external angle.
