Specifications include, but are not limited to: 3.1 General: The dealer/manufacturer who furnishes the solid waste collection body shall also furnish the truck chassis to be purchased from a local Dealer in Dodge City, Kansas and shall supply to the City a complete unit, ready for waste collection. _______ 3.2 Chassis and Engine: 3.2.1 GVWR: 44,000-lb. minimum. _______ 3.2.2 Cab: Conventional Steel - Shall have a forward tilting hood to open for service or maintenance. The radiator shall remain stationary with the hood open. _______ 3.2.3 Axles and Springs 3.2.3.1 Axle, Front: Multileaf, Shackle Type; 14,000-lb Capacity; With Shock Absorbers _______ 3.2.3.2 Suspension, Front, Springs: Multiyear, Shackle Type; 14,000-lb Capacity; With Shock Absorbers _______ 3.2.3.3 Single, Rear, Axle: 30,000 lb _______ 3.2.3.3 Lift Axle Description: Lift (Pusher) axle (20,000 lbs. minimum capacity) or Equal. This axle should be non-powered and shall be air up/air down with a control valve and regulator located in the cab within reach of the operator. The axle should have service brake chambers. (4) new 255/70R 22.5 tires (14 PLY) and hub piloted wheels. Installed Complete _______ 3.2.3.4 Rear Suspension: 31,000 lb w/ 4500 lb Auxiliary Rubber Springs 1,000 _______ 3.2.4 Tires and Wheels 3.2.4.1 Wheels: DISC; 22.5x9.00 Rims, Powder Coat Steel, 5-Hand Hole, 10-Stud, 285.75mm BC, Hub-Piloted, Flanged Nut, with Steel Hubs, Non-Standard Offset, with .5" Thick Disc. Rear, DUAL DISC: 22.5x9.00 Rims, Powder Coat Steel, 5-Hand Hole, 10-Stud, 285.75mm BC, Hub-Piloted, Flanged Nut, with Steel Hubs _______ 3.2.4.2 Front tires: 315/80R22.5, 20 PLY, All-Position _______
