Specifications include, but are not limited to: Stainless steel repair clamps shall meet the following requirements: 8.1.1 The clamp shall consist of Type 304 stainless steel band complete with: Tapered ends. 8.1.1.1 A full length, one-piece gridded rubber gasket 8.1.1.2 Ductile iron lugs 8.1.1.3 Stainless steel closure bolts 8.2.1 Type 304 stainless steel bolts and nuts. 8.3.1 Ductile iron lugs shall have a corrosion resistant epoxy coating as recommended by the manufacturer. 8.4.1 The rubber gasket shall be Nitrile (Buna-N) and formulated to be compounded to resist hydrocarbon compound oils, acids and alkaline. 8.5.1 Repair clamps shall be sized to fit both pit cast and centrifugally cast- iron pipe. 8.6.1 Clamp and lug shall be designed to be of the drop-in bolt design to accommodate the replacement of a single bolt. 8.2 Any deviation from these specifications or other documents associated with the bid must be documented on company letterhead and submitted prior to bid close.