Specifications include, but are not limited to: Elbeco Paragon Plus or approved substitute. Shall include but not limited to the following: 1. The front shall have a facing width extending from the neckline to the bottom of shirt provided by a turn under of material. The left front shall also have a lined box pleat 1-1/2” wide finished, running full length of the shirt and shall be topstitched from both edges. The left front shall contain seven vertical buttonholes placed ¾” from the edge and 3-1/2” apart. 2. Buttons shall be securely attached to the button stand on the right front, and shall correspond to the buttonholes placed ¾” from the edge and 3 ½” apart. 3. Color: White 4. The following shirt sizes: Extra Small (XS); Small (S); Medium (M); Large (L); Extra Large (XL); Extra, Extra Large (2XL); Extra, Extra, Extra Large (3XL); Extra, Extra, Extra, Extra Large (4XL); and Extra, Extra, Extra, Extra, Extra Large (5XL) or equivalent. Women sizes: 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50. 5. Two (2) mitered breast pockets with Velcro or equal, down flaps. The left pocket flap shall have a slot for pen. Both pocket flaps shall have a non-functioning button that lends to a professional appearance. 6. A dress collar that is fused to stay straight and smooth and reinforced with pellon for added shape retention and to retain a clean, crisp shape. 7. A badge tab to be reinforced on the inside of the shirt by means of a strip of fabric, identical to the shirt and measuring 1-1/2” inch wide stitched and folded so that no raw edges show. The reinforced strip is to extend from the flap setting stitch to the joining seam at the front of the yoke. To have two small horizontal buttonholes, 1-1/4” apart with the bottom buttonhole 1-1/2” above the top of the left flap. 8. Shirt to have permanent military creases. Creases to be stitched in shirt only, not thru pockets and flaps. One crease in each front extending from hem to joining seam. Three vertical crease in back middle crease on center back line; side back creases spaced equally from center crease. 9. All buttons shall be size 20 ligne and made from melamine material for durability and must match fabric. 10. Fabric should be 65% Dacron Polyester/35% Cotton or approved substitute. Must be treated at the fabric level with fluid repellency technology, while maintaining original fabric breathability.