Specifications include, but are not limited to: Provide all necessary labor, materials and equipment to dry dock or haul on railway the R/V Palmetto, 110' OAL x 26' Beam x 7' Draft steel hull vessel. Properly shore and brace, without list, while in dock. Pressure wash with 3500 PSI entire underwater hull to remove marine growth, dirt, slime, and salt contaminates and inspect zincs, rudders and wheels, report findings. Remove sea-chest grate and plug intake, after paint, unplug and replace grate. All transducers, sensors, and discharge ports to be covered properly while out of the water. Remove and store diesel fuel as necessary, (~8,000 gals onboard) prior to removing vessel from the water if desired by vendor. Contractor will be responsible for refueling vessel once job is completed, with the equivalent that was removed. Gas Free vessel and clean bilges as required.