Specifications include, but are not limited to: Base Bid shall consist of the following: a. Entrance Doors: Power wash, hand abrade, and overcoat three entrancedoors, patching where necessary with a product compatible with theexisting coating system. One door has been purchased and installedbytheOwner and currently has no coatings in place. Surface prep and coat newdoor in accordance with the specifications. Color to match existing doors. b. Stair side rails: Power wash and overcoat in accordance with the specifications. Sandblast, prime, and recoat all highly corroded areas. c. Interior Piping: Sandblast, prime, and recoat in accordance with thesespecifications. d. Pumps, motors, pump shrouds, protective cages: Surface prep andrecoat in accordance with the specifications. Protect pumps, motors, and all other equipment from damage at all times during construction. Submit proposedsurface preparation methods for pump and motors prior to commencingconstruction. e. Handwheels: Power wash clean and overcoat. Blast, prime, and recoat all highly corroded areas in accordance with the specifications. f. Floor Drains: Power wash clean. g. Pump base plates, shrouds: Commercial Blast Clean, prime, and recoat inaccordance with the specifications. Protect pumps fromdamage at all timesduring construction. h. Equipment removal hatches: Power wash clean tops. Surface prep, prime, and recoat underside of hatches in accordance with the specifications. i. Electrical boxes: Power wash clean and recoat in accordance with thespecifications.