Specifications include, but are not limited to: New INDOOR Walk-In Cooler/Freezer Combination (2 compartments); • Uninstall existing walk-in cooler/freezer box, refrigeration and haul off unit. deliver new walk-in cooler/freezer and install new box and refrigeration. re‐use s/s vent covers above walk in box. • Construction Approvals: NSF Approved, cULus and CSA Electrical, UL Flame Spread‐25 and ULC Flame Spread‐50 in accordance with ASTME‐ 84. To comply with the US Energy Independence & Security Act of 2007, all walk‐in doors opening into the ambient (indoors or outdoors) are required to have a method for minimizing infiltration when the doors are open. All walk‐in doors will include a spring hinge to comply with this standard by 1‐1‐09, to further minimize infiltration, must include a strip curtain or strip door for all exterior doors. • Contractor shall perform all installation services between the hours 5:30 AM and 7:00 PM, 7 Days a week. • Contractor shall provide 1 freezer truck and 1 cooler truck for current food on hand during installation. • Removal and disposal of existing units, including freon from old equipment