Specifications include, but are not limited to: Sign Materials and Fabrication are to be in accordance with Section 675 - traffic signs and division 700 - materials of the 2018 VT AOT Standard Specifications for construction. Signs shall conform with AOT E-Series and T-Series standard sheets. Sign faces are to comply with the FHWA Standard Highways Signs guidelines." Items received under this contract shall meet all current requirements of: 2.1. FHWA Standard Highway Signs 2004 edition and 2012 supplement: http://mutcd.fhwa.dot.gov/sershs_millennium.htm 2.2. Vtrans Standard Specifications for Construction 2011 and updates (sections 675 and 700 specifically): http://vtranscontracts.vermont.gov/construction-contracting/2011-standard-specifications. 2.3. They shall also meet the Vtrans Standard Drawings, E-series and T-series; http://vtranscaddhelp.vermont.gov/downloads/standards 2.4. Special Size Signs shall be priced per square foot, based on facing type and type/thickness of sign backing. 2.5. Sheeting types shall include Transfer Tape, EC Film, Type IV, Type IX, and Type XI. EC Film and the reflective sheeting need to be of the same company. 2.6. Sign measurements shall consistently be expressed as: width by height by thickness (W x H x Th). 2.7. Sign backing material: 2.7.1. Aluminum Type A sign thickness shall be 0.063", 0.080", 0.100", or 0.125". 2.7.2. Any changes to this contract will be done by Change Order by Purchasing and Contract Administration.
