Specifications include, but are not limited to: This specification is for white and yellow rapid dry acrylic waterborne traffic paint to be applied on asphaltic or Portland cement concrete pavements. Paint must perform properly when preheated to 120 - 150°F and applied using the Departments equipment and accept glass beads so that the spheres are imbedded to a depth of 50% of their diameter. GENERAL REQUIREMENTS: Paint shall conform to Section 1015.12 of the 2016 Louisiana Standard Specifications for Roads and Bridges and shall be from an approved source on the Approved Materials List (AML) for Traffic Paint, Waterborne, White and Yellow. SUITABILITY: Paint shall show no excessive settling, caking or increase in viscosity during six (6) months of storage, and shall be a suitable consistency for standard spray gun application. Flow of paints through the outlet nozzles shall be smooth, uniform and fluid.