Specifications include, but are not limited to: Medium Type I Ambulance Body 2022 or Newer Ford F550 6.7L Diesel Automatic Transmission 4x4 Whelen Light package Opticon Light in center front for traffic control device Black over Red paint scheme (Example will be supplied) Chevrons on Front Bumper 3” Scotch Lite or similar White Stripe Hi Reflective Grill guard with fog lights Unit ID Sign Holder riveted to body on front of the body – 12 x 12 inches on sides of the body – 12 x 12 inches on rear of the body – 9 x 9 inches Cab – Exterior Chassis Spotlight (Hard wired) Pole secured to floor to mount Tablet- compatible with Havis mounts Charging Mount for Dell 7220 Dual siren with Rumbler Rear Safety Camera and Camera for Patient Care area Passenger side Camera on with Right turn signal Rubber floor with heavy duty rubber floor mats Q-Siren - Fabricate Aluminum Spacers and Install Docking Bumpers on each side of Q Air Horns Air Horn controls Driver Side on steering wheel Passenger side on dog house (switch or button) Q-Siren Driver side and passenger side foot petals LED running board lights (full length of step) Compartment to hold three standard boxes of Medical Gloves on dog house Install of Motorola APX 8500 Radio with remote head to patient compartment 4 USB charging Ports for peripheral equipment 2 Each Motorola Mobile charging stations for APX 8000 “Fast Five” Sign with Maximum height listed. (Example will be supplied) Daytime head lights Dimmer for “night time” brake lights Box – Outside – 66” width Auto Load for large O2 cylinders Rear full Chevrons Yellow/RED DOT Reflective Space for two (2) Spare Jumbo D cylinders Slide out for stair chair (Stryker Model Stair Chair) Stryker Stair-PRO Stair Chair Compartment with slideout – doors open past 90 degrees Mounting of 2 Streamlight flashlights on inside door with capable of charging. (2) SCBA brackets for Scott 5.5 Airpacks Straps to mount tools on rear of slide out – Axe, and Halligan 4 hooks on wall for Helmet and mask Shorelines to be attached to Rear of Box, on drivers side. Kussmaul Auto eject with power on Box – Inside Stryker: Power-PRO 2 Cot With O2 Cylinder at head rest not foot rest Power-Load Smart Battery Kit Captain seat with integrated Child Safety seat IV bag holders on side walls O2 Connections above patient care at stretcher head O2 Connection down low by back door recessed for rehab O2 Connection on wall curb side bench area Mounting system multiple locations for Intraxx Mounting of a Knox Box Large Capacity With WiFi Connectivity, facing rear at bench seat Mounting of Knox KeySecure (customer supplied) Digital clock mount on rear wall. USB charging ports 1 set near cabinet on bench seat 1 set near airway action area/captain seat Medication Refrigerator - under bench seat Compartment with drawers at head of bench seat Mounting Bracket for Zoll X series on top Item #13 Bench seat capable of placing one patient on bench full spine board Adjustable dividers on shelves near airway shelf, and above bench seat Fluid and Blanket warmer - under bench seat Danhard Environmental system operational with shoreline Medical Glove Dispenser at rear of patient care area three (3) sizes Med; Large; XL Trash can at/near rear door Trash Can at/near patient’s head CPR seat 1.5 times size to accommodate patient care Cabinets facing CPR seat to access to supplies while in transit Mounting sharps container (model to be provided) Minimum four (4) 110Volt outlets in patient care area Minimum four (4) 110Volt outlets in the Inside/outside cabinet HVAC with ION disinfection system Autopulse cabinet – capable of opening from inside or outside the unit.