Specifications include, but are not limited to: Remove the old fire pump control panel and install new Firetrol FTA-1930-AM25B T (FTA 950), 25HP, 3/60/480 soft start fire pump controller and automatic transfer switch. • The new Fire Pump Control Panel and Transfer Switch will have the following features: Firetrol Model FTA1930-T(FTA-950), 25 HP, 3/60/480 soft start fire pump controller and automatic power transfer switch complete with the following: ISOLATION SWITCH/BREAKER ASSEMBLY FOR NORMAL & EMERGENCY POWER, SOFT START MODULE, BYPASS CONTACTOR, MARK III+ DIGITAL CONTROLLER WITH HISTORICAL FAULT LOG AND FLASH DRIVE RECORDER, VOLTAGE SENSING MODULE AND DIGITAL TRANSFER SWITCH MODULE, ALARM OUTPUT RELAYS FOR PHASE FAIL, PHASE REVERSAL, AND PUMP RUN, NEMA 2 DRIP PROOF ENCLOSURE, CONTROLLER TEST CIRCUIT WITH 2 WAY VALVE, DIGITAL LOCAL ALARM ANNUNCIATION, PRESSURE TRANSDUCER. • Project shall include all electrical work. • All materials and workmanship will meet or exceed NFPA standards as well as state and local codes. • Establish a ZERO HARM work zone in all areas of work. • Field Survey for safety conditions. • Factory and NICET trained technicians. • Project coordination of material and labor on and off site. • Testing upon completion in accordance with applicable codes. • The use of manufactured products that meet all NFPA and UL codes.