All correspondence must be made through the Vendor Portal. Specifications include, but are not limited to: A. Remove approximately 1000 feet of existing barbed wire fence surrounding the back parking lot. B. Furnish and install new 9 gauge galvanized chain link fence plus razor wire material according to the scope of work listed below. D. Install 3 feet of galvanized chain link with three (3) strand barbed wire and razor ribbon attached. E. Install new line posts every 6 feet on center on top of brick wall - 2 7/8” Schedule 40. F. Top rail - 1 5/8” Schedule 40. G. Bottom tension wire 9 gauge smooth. H. Install 3 foot section of fencing on top of existing brick wall and top with razor wire. I. Maintain a safe working environment to prevent injuries to CHP personnel or damage to CHP property. J. The contractor, at no expense to the State of California, will repair any damage caused by the contractor or any of his/her workers. K. The contractor must field verify all measurements encompassed in this project and is solely responsible for their accuracy. L. The contractor will keep the work site clean, and haul away any work site debris. All removed material must be recycled where possible. M. Warranty all parts and workmanship for a period of one (1) year. Contractor to supply the manufacturer’s warranties and manuals for any parts used in this project.
