Specifications include, but are not limited to: A. Appendix C is intended to describe a fully functioning 10-foot fixed V plow. All modification and or components needed to supply INDOT with a fully operational front mount plow will be included with the bid option. yes no B. The entire unit shall be rated structurally for a minimum of interstate and highway snow removal application while being utilized by a plow truck with a GVWR of 66,000 lbs. yes no C. The V-plow bid shall be completely compatible with INDOTs current front plow hitch. the Gledhill hitching assembly, without any modifications NO EXCEPTIONS. INDOT PLOW HITCH - Monroe PN- 00100278 yes no D. The V-Plow shall have a minimum cutting width of 10 feet. Cutting width - _____________ yes no E. The Moldboard width at the top of the yes no F. The plow shall have a minimum 55-inch height at the nose and a minimum 84- inch height at the rear. yes no G. The moldboard thickness shall be 10 GA high strength steel. yes no H. Plow moldboard shall be constructed of 3/16” thick, rolled plate steel and shall be reinforced with full length 3/16” thick, high tensile steel (50,000 psi) box channels. yes no I. The plow shall have a front nose height of 40” and a rear height of 68” with overall external dimensions of 132” W x 108” D x 68” H. yes no J. Two (2) ¼” thick reinforcing support plates (no less than 4 square ft. each) attach the support structure to the moldboard and absorb and distort the shock of impacts yes no
