Specifications include, but are not limited to: Remove bad sections of old existing pour in place material, patch areas and install and install new ½” EPDM top coat pour in place material on the entire existing area around the special needs playground structure located in Riverside Park at 600 South State Street in Iola, Kansas. Provide all labor, materials, equipment, and services required to accomplish related work. The surface shall be poured-in-place and troweled to provide a resilient, seamless rubber surface. Surface shall be installed over the specified sub-base and composed of premium quality EPDM rubber mixed with a non-flammable, non-shrinking, one part moisture cured polyurethane adhesive. The surface shall meet or exceed all requirements set forth in the Americans with Disabilities Act (ADA), American Standard Testing Methods (ASTM), and Consumer Products Safety Commission (CPSC) for surfaces under and around playground equipment. Poured in Place surface shall only be installed by the manufacturer or its certified installers.