Specifications include, but are not limited to: The University of Wisconsin-Madison, hereinafter referred to as the “University”, through its Purchasing Services Department, hereinafter referred to as “Purchasing”, on behalf of Athletics, hereinafter referred to as “Department” or “Athletics”, requests bids for the purchase of Audio Equipment for Labahn Arena. Main Bowl Sound System Features: All necessary design, fabrication, amplification, acoustic devices, and technical installation for areas described in the equipment list. Premium full-range distributed sound system with Fulcrum Acoustic loudspeakers featuring Temporal Equalization for a highly intelligible and musical system with consistent coverage through the seating area 54 Hz to 20 kHz component frequency response (FH15 – Seating Area) +/- 3 dB broadband seating coverage with an average maximum output of 103 dBA Dynacord IPX amplification - Controlled and monitored through the Q-SYS processing platform – custom programming that enables continual logging of loudspeaker impedance and limiting while in use. On-board DSP for loudspeaker processing with FIR tuning capabilities On-site operator training at time of installation Virtual technical support for an event to help with operation and any necessary adjustments Main Arena Sound System – Equipment Needed: Loudspeakers 14 FH1566 Fulcrum Acoustic Full Range Coaxial Horn with 15" Low Frequency Driver 14 YK-FH15 Fulcrum Acoustic FH15 Series Yoke Bracket P Series Fulcrum Acoustic 8" Coaxial Loudspeaker YK1308 Fulcrum Acoustic P Series Yoke Bracket Amplifiers IPX10:8 Dynacord 8 Channel Power Amplifier with DSP and Dante Processing QSC 64x64 Software Based Dante License Engineering: Provide engineering services for installation Engineer and provide proper mounts for speakers and existing beams in Labahn Provide engineered speaker mounting details Locations Angle of hang Required cabling Safety Systems Technical Installation: Provide one on site tech for system wiring, programming, deployment and tuning. Speaker Installation will be completed by Athletics All Electrical work (if any) will be completed by Athletics All lifts and chain motors will be provided by athletics