Specifications include, but are not limited to: LION® V-Force® Structural Firefighting Coat with Black 6-oz PBI Max™ outer shell, Crosstech® Black moisture barrier, Glide Ice™ 2L Araflo® and Isodri® Moisture Management System including Semper Dri™ water well in coat sleeve and 4" Isodri® wristlet with sewn on Nomex® webbing thumb loop, 6-piece raglan sleeves, V-Fit® design, Drag Rescue Device, 3" Comfort Collar with zipper liner to outer shell interface, 3” NYC L/Y Reflexite® Ventilated Trim™ for V-Force Bi-swing, Ever-Dry™ Reach System, Semper Dri™ with moisture wicking resistant face cloth in coat sleeves and yoke, and zip in liner with liner inspection opening. Flashlight strap, radio pocket, glove holder (1.5"dee added to loop, attached to o/s), mic tabs both sides of chest. Handwarmer pockets, fully lined w/PCA, w/ 2 layers lite-n-dri inside flap & PCA tab. 4”x22" letting patch sewn on coat tail w/ 3” letters for firefighters name in lime yellow Reflexite® lettering, gold PCA zipper pull, 2”x2” Thermopatch QR labels added to coat shell and liner per PSGQ. NFPA 1971 MADE IN ; LION® V-Force® Structural Firefighting Pant with 6-oz PBI Max™ outer shell, Crosstech® Black moisture barrier, Glide Ice™ 2L Araflo® and Isodri® Moisture Management System, pant fly with zipper liner to outer shell transition, V-Fit® design, 2" wide Kevlar® belt, 4x3.5" belt loops, Reflexite ® Ventilated Trim™, Black PCA contoured knees w/3 layers Lite-NDri™, Black PCA pant reinforcement from bottom of knee to under trim, radial inseam, Semper Dri™ in bottom 9 inches of pant legs, combination snap and zip in liner w/ inspection opening. Boot cut pant cuffs w/ elasticated pant liner cuffs, 2 pockets fully lined w/PCA, including 2- layer tool holder sewn to inside, w/ 2 layers lite-n-dri inside flap & PCA tab. 2 mic tabs added to rear waist for radio strap attachment. 1 pair of 1x8.5" pant take up straps adjustable w/ hook & loop and bartacked to pant outer shell, located under belt loops. 42" V-Back quick adjust suspenders w/ black Nomex® tabs each containing 2 snaps (suspenders installed on pants). 4) .5x2.5" 6oz PBI Max™ belt loops set horizontally on the outside of the waist at the proper location for attaching the suspender, 2”x2” Thermopatch QR labels added to coat shell and liner per PSGQ. NFPA 1971 MADE IN USA
