Specifications include, but are not limited to: I. PAVING 1. ASPHALT LAYDOWN MACHINE (min. crew of 3 qualified operators included) min. 35 HP, 8' – 13' Paving Width. 2. ASPHALT LAYDOWN MACHINE (min. crew of 3 qualified operators included) min. 110 HP, 8' – 25' Paving Width. 3. ASPHALT LAYDOWN MACHINE (min. crew of 3 qualified operators included) min. 170 HP, 10' – 30' Paving Width. 4. ROLLER, RUBBER TIRE, 8 Ton 5. ROLLER, STEEL WHEEL, VIBRATORY, 3 - 5 Ton 6. ROLLER, STEEL WHEEL, VIBRATORY, 5 - 8 Ton 7. ROLLER, STEEL WHEEL, SMOOTH DRUM, 8-10 Ton 8. ROLLER, STEEL WHEEL, SMOOTH DRUM, 10-12 Ton 9. ROLLER, WALK-BEHIND 10. COMPACTOR, FLAT PLATE 11. CRACK SEAL MACHINE, Bearcat 250D or equal 12. DISTRIBUTOR TRUCK (Asphalt), 1400 to 2499 Gallon capacity 13. WIND ROW ELEVATOR 14. CONCRETE, ASPHALT, EXTRUDED CURB MACHINE, WALK-BEHIND 15. PAVING EQUIPMENT GROUPS a. PAVING EQUIPMENT GROUP A - (PAVING EQUIPMENT), shall consist of one Asphalt Laydown Machine Min. Crew of 3 Qualified Operators included, min. 110 HP, 10'-20' Paving Width, one – Roller, Steel Wheel, Smooth Drum, 10-12 Ton with operator, one – Roller, Steel Wheel, Smooth Drum, 8-10 Ton with operator, one – 10' Straight Edge, one – Loader Gannon Tractor, min 65 HP with Operator. The unit price bid shall include all pieces of equipment, and the necessary transport to the work site, manpower, fuel, oil, taxes, etc., necessary for each piece of equipment to perform the work. Payment for this group shall be unit price per day, or per week, or per month, and/or additional hour. Any additional equipment required will be paid for at the unit price bid for the specified equipment. b. PAVING EQUIPMENT GROUP B - (WORK ZONE EQUIPMENT) shall consist of one pick-up truck to transport and set up, two equipped certified flaggers, two “Road Work Ahead” signs, two “Be Prepared to Stop” signs, two “Flagger Ahead” symbols, and 24 cones. c. PAVING EQUIPMENT GROUP C - (CRUSHING AND PUGGING OPERATION), shall consist of one – Impact Crusher capable of crushing 400-800 tons of material per hour with Operator, one – Loader with three cubic yard minimum with Operator, one –Water Truck with 2,000 gallon capacity minimum with Operator, and one Pug Mill with 500 ton output with 100% aggregate coating asphalt liquid metered input with Operator. The unit price bid shall include all pieces of equipment, and the necessary transport to the work site, manpower, fuel, oil, taxes, etc., necessary for each piece of equipment to perform the work. Payment for this group shall be unit price per week, or per month, and/or additional mobilization fee. Any additional equipment required will be paid for at the unit price bid for the specified equipment. d. PAVING EQUIPMENT GROUP D - (ASPHALT CONCRETE MILLING MACHINE, MICRO-MILLING DRUM, 7' WIDE), shall consist of one – 500 minimum HP Asphalt Concrete Milling Machine with a 7' minimum working width, with a minimum of 450 cutting tools (teeth), that is capable of milling asphalt concrete from 0 to 1" deep, with multiplex leveling sensors, with Operator. The unit price bid shall include all pieces of equipment, and the necessary transport to the work site, manpower, fuel, oil, taxes, etc., necessary for each piece of equipment to perform the work. Payment for this group shall be unit price per day, per week, or per month, and/or additional mobilization fee. Any additional equipment required will be paid for at the unit price bid for the specified equipment. There is no compensation for wear or damage to the machine or cutting tools (bit, holders, teeth) on this contract item.