Specifications include, but are not limited to: The truck is an International HV507SVA with a 183.00 wheelbase, 108.00 CA and 63.00 axle to frame.; • Battery cables are 36 inches of extra length coiled and strapped near the battery box.; • Battery box is on the left side of the cab.; HITCH AND WING SYSTEM: • Hitch to be of tilting design.; • Hitch shall tilt forward for engine access when two top pins are removed.; • There shall be a double acting cylinder for plow lift.; • Three plow pin heights shall be provided.; • Two Horizontal Tubes shall extend outward to the passenger side of the chassis to serve as support for the front wing post. ; WING: • Cutting edge Length: 10'; • Overall Length: 11' Full Trip; • Moldboard Constructed from 8 gage high strength carbon steel and reinforced with full length ribs.; • The wing shall be punched 12" on center.; • Wing shall come complete with carbide and cover plate and (2) moldboard shoes installed.; PLOW: • Shall be a Poly Reversible Trip Edge Plow.; • Cutting edge length: 11'; • Moldboard Nose Height: 42"; • Moldboard shall Poly; • Plow shall be punched 12" on center.; • The plow shall come complete with carbide and cover blades.; DUMPBODY: • Beau Roe Model SSM4-10'x36"x48"; • Inside length: 1 O'; • Sides height: 36" inches; • Tailgate height:48" inches; • Hoist cylinder: Single acting telescopic.; • Cab shield: 24" overhang with Oval Cutout front and side of Cab Shield for Strobes.
